Name: Chef's Knife
Brand: Shiro Kamo
SKU: G-405-PINK
Price: 191.95 EUR
Availability: InStock

Chef's Knife

€191,95 EUR

VAT included for EU orders.

G-405-PINK

Chef’s knife with a 247 mm blade

Weight: 203 g
Thickness at heel: 3.85 mm
Spine thickness at midpoint: 1.8 mm
Blade height at heel: 54 mm
Cutting edge length: 247 mm
Sharpening angle: 14 degrees per side
Handle: Octagonal pink maple handle.

NOTE: Measurements and weight may vary slightly as the knife is hand-forged.

Shiro Kamo is a highly regarded blacksmith from the renowned Takefu Knife Village in Japan. These knives are handmade from Aogami #2 carbon steel, which Shiro hardens to an impressive 64 HRC. The blade is tapered, meaning it is thickest near the handle and gradually becomes thinner towards the tip. The knives in this series have a bold, rugged appearance, while the edge is extremely thin and delivers outstanding sharpness and excellent cutting performance. This is one of our most popular knife series!

Carbon steel is not stainless, and Aogami #2 is no exception. However, the black kurouchi finish provides very good protection against rust and patina. The lower part of the blade will develop patina much more readily than the black-finished section. Always wipe the knife dry after use. Also keep in mind that certain ingredients, such as citrus fruits and tomatoes, can have a strong visual effect on the blade.

We call this knife Kuroi Ryuu (黒い竜), which means “Black Dragon” in Japanese.

NOTE: Aogami #2 is a carbon steel and is not stainless. The iron cladding on the sides of the blade also needs to be kept dry to prevent rust over time.

Manufacturer: Shiro Kamo
Model: Gyuto
Length: 245 mm
Steel: Aogami #2
Carbon steel | Iron clad
HRC: 64HRC
Forging: Sanmai
Handle material:

Carbon steel
Carbon steel is not stainless and therefore requires a little more care than stainless steel. Always clean and dry the knife thoroughly immediately after use. This is especially important after cutting acidic foods such as citrus fruits, tomatoes and onions, as the acid can quickly react with the steel.

Do this:

Clean the knife immediately after use.
Wash by hand using the soft side of a dish sponge and a little dishwashing liquid.
Dry the blade thoroughly after cleaning.
For long-term storage, the blade can be protected with a thin layer of tsubaki oil.

Avoid:

Dishwashers.
Leaving the knife in water or allowing it to remain damp.
Leaving food residue, especially from acidic ingredients, on the blade.

Patina, a completely natural oxidation of carbon steel

As carbon steel is used, the blade will gradually change colour and develop a patina. Depending on the foods you cut, it can take on shades of grey, blue, brown and sometimes even almost rainbow-like tones.

Patina is a natural reaction between the steel and food and is not the same as rust. In fact, an established patina provides some protection for the steel and makes the blade less reactive over time.

Rust, on the other hand, should be removed. It is often orange or reddish-brown and may feel rough on the surface of the blade. A patina is normally smooth and is a natural part of owning and using a carbon steel knife.