Name: Santoku
Brand: Hatsukokoro
SKU: Hikari-DAM-170SA
Price: 149.95 EUR
Availability: InStock

Santoku

€149,95 EUR

VAT included for EU orders.

Hikari-DAM-170SA

Santoku with a 170 mm long blade and a beautiful damascus steel cladding.

Steel: Semi-stainless SLD with damascus cladding (HRC: 60-62)
Blade length: 170 mm
Blade height: 47 mm
Thickness at heel: 1 mm
Thickness at mid-spine: 1 mm
Weight: 117 grams
Blade finish: Dark etched damascus steel cladding
Handle: Mono bubinga

This knife series is the result of a close collaboration between Hatsukokoro and one of the largest and most highly regarded knife manufacturers in Seki City, Japan. We are impressed by this knife series with its fine SLD steel, which, combined with a beautiful finish, very thin blades, and a very good price, receives our warmest recommendation.

SLD is a very durable steel that holds its edge for a very long time, especially when not sharpened too smoothly, allowing the edge to retain some bite. We recommend finishing between 1000 and 3000 grit for both sharpness, bite, and long edge retention. SLD is SEMI-STAINLESS, which means it resists rust well, but is not 100% rustproof. Over time, the core steel will darken slightly, giving the knife a beautiful contrast between the core steel and the damascus cladding.

Important:
Remember that the edge is hard and thin. Therefore, be careful not to subject the edge to stress, especially sideways. When using a Japanese knife with a thin blade, the edge should always be in motion when cutting. Under no circumstances should you push the blade through an ingredient without the edge being in motion. Nor should you twist or wiggle the blade to pry apart ingredients.

Manufacturer: Hatsukokoro
Model: Santoku
Length: 170 mm
Steel: SLD
Rostfritt stål | Rostfri kappa
HRC: 60-62 HRC
Forging:
Handle material: Bubinga

Carbon steel
Carbon steel is not stainless and therefore requires a little more care than stainless steel. Always clean and dry the knife thoroughly immediately after use. This is especially important after cutting acidic foods such as citrus fruits, tomatoes and onions, as the acid can quickly react with the steel.

Do this:

Clean the knife immediately after use.
Wash by hand using the soft side of a dish sponge and a little dishwashing liquid.
Dry the blade thoroughly after cleaning.
For long-term storage, the blade can be protected with a thin layer of tsubaki oil.

Avoid:

Dishwashers.
Leaving the knife in water or allowing it to remain damp.
Leaving food residue, especially from acidic ingredients, on the blade.

Patina, a completely natural oxidation of carbon steel

As carbon steel is used, the blade will gradually change colour and develop a patina. Depending on the foods you cut, it can take on shades of grey, blue, brown and sometimes even almost rainbow-like tones.

Patina is a natural reaction between the steel and food and is not the same as rust. In fact, an established patina provides some protection for the steel and makes the blade less reactive over time.

Rust, on the other hand, should be removed. It is often orange or reddish-brown and may feel rough on the surface of the blade. A patina is normally smooth and is a natural part of owning and using a carbon steel knife.